***Please note, the pricing on this page is for rearend and components as a package order ONLY***

Here is a list of the options and pricing so you can get a better grasp of what is available and the approximate costs. 

Lots of options on these rear ends... Price will depend on how you outfit the package. Look through this list and pick out the things that you want and we will go from there. We suggest the use of a back brace at 550-600rwhp, or if you think you'll ever get there because we can't add a brace later. It has to be done while the housing is on the fixture to do it correctly. We also suggest a good driveshaft as well, the stock one will work with a conversion u-joint, but ends up a bit short and is too weak for any hard launches, especially w/ a m6 car.

For the rearend package here's the current pricing schedule:

Base package includes housing(any width), Strange nodular iron case(rated 600hp) center section with spool and choice of gear ratio(Motive Performance), 35 spline Strange axles w/ street bearings and 2" 12mm metric or 1/2" SAE studs, and chromoly double adjustable torque arm with crossmember for your application. All necessary hardware is included as well. The base package is $2999
shipped to the lower 48 states (far corner states may incur a slight surcharge due to shipping costs). Residential deliveries of complete assembled rearends will require a liftgate service and will need to be quoted for that at the time of order. If an order is cancelled the $500 deposit is non-refundable, and remaining refund balance is subject to credit card processing fees.

OPTIONS:

Housing backbrace +150.00

Additional Meziere rear side filler cap installed +40.00
Tow loops welded to rear of housing +50.00
Transverse Shock Mounts +30.00
Completely assembled rearend ready to bolt-in +150.00  (will need
 to be supplied with your brake caliper mounts or new ones)
Powder coating(black or red) +150.00
Custom colors available

3 channel abs (any center section/diff unit) +185.00
4 channel abs axle mod +110.00
New 4 ch. abs rings(if needed) +100.00

Powertrax 35 spline differential unit +375.00
35 spl Strange S-Trac diff unit +800.00
3.00 or 3.25 gear(Motive) +25.00
Richmond gears available - please call for details and available ratios
US Gear -  only US made gear available and highest quality - all ratios +75.00
Strange lightweight alum center, alum support, forged yoke +250.00
Strange Pro Nodular iron case, 1000HP +175.00
Strange HD Pro Thru-bolt with exclusive pinion support +425.00
Strange Ultra Case & C/M Yoke Upgrade +650.00(track only, 1200hp+, 35 or 40 spl Pro axles)
Forged alum support and forged yoke (iron cases) +100.00
Forged alum support and Chromoly yoke +125.00

Strange 93-97 disc caliper mounts +195.00
Strange sportsman brake kit +450.00 shipped
Strange Pro Race brake kit +560.00 shipped

MWC tubular chromoly anti-roll bar +350.00
MWC tubular chromoly full bolt-on anti-roll bar +375.00
MWC mild steel adjustable lca's +158.00
MWC mild steel adjustable phb + 118.00
MWC tunnel form-fitting d/s loop for long arm +80.00 
MWC watts link +525.00
Subframe Connectors +140.00 
Wishbone +299
Chassis Mount Anti Rollbar +499
Magnetic angle finder for setting up pinion angle 10.00

*we can do the 3ch abs w/ aluminum case (or any case for that matter!)... Moser won't.

*** We strongly suggest a performance driveshaft with this or any aftermarket rearend.  The stock shafts are failure prone and will become the weak link in the driveline.  The cost of repairs incurred from a failed driveshaft will far overcome the investment of the correct shaft for your application. MWC proudly offers performance driveshafts from Strange and PST.

The true fabricated rearend housing features components such as a drain plug, 5 hole relocator style lca brackets, stock style anti-sway bar mounts, brake line clips, and chassis brake hose mounting bracket. 98-02 applications also include brake hose mounts and e-brake cable brackets.  These features are all standard equipment at no extra charge.  Other manufacturers don't even offer some of these items that make it a true bolt-in.

The chromoly double adjustable torque arm is included with the package and is exclusive to this housing. Short (tunnel mounted) and long (trans crossmember mounted) versions available. Both are the same cost, the short arm crossmembers come with a driveshaft loop installed (available with dual exhaust), the long arm comes with a new trans crossmember, but no loop. We do have a tunnel form-fitting driveshaft loop available for the long arms or any other configuration. It is profiled to the floor pan and does not interfere with exhaust or ground clearance.

The base package rearend with the aluminum center section upgrade will weigh about the same as the stock 10 bolt.  The nodular case is only 15 pounds heavier.  Due to the design and construction, the chromoly adjustable torque arm is some of the lightest and strongest on the market, and weighs less than just the adapter bracket itself on a standard Moser 9".  The complete rearend with the aluminum case upgrade and a spool would actually be lighter than the stock 10 bolt.

Feel free to call with any questions you may have. (309)382-6252

Packages- 
F-Body Fabricated Nine Inch Housing, Torque Arm, Crossmember Package- $1699.00 Purchase Here
F-Body Fabricated Nine Inch Housing, Torque Arm, Crossmember, Axle Package- $2099.00 Purchase Here
F-Body Fabricated Nine Inch Housing, Torque Arm, Crossmember, 35SPL Axles, Spool Package- $2999.00 Purchase Here
F-Body Fabricated Nine Inch Housing, Torque Arm, Crossmember, 35SPL Axles, Powertrax Package- $3374.00 Purchase Here
F-Body Fabricated Nine Inch Housing, Torque Arm, Crossmember, 35SPL Axles, S-Trac Package- $3799.00 Purchase Here
F-Body Fabricated Nine Inch Housing, Torque Arm, Crossmember, 40SPL Axles, Spool Package- $4094.00 Purchase Here


***Please note, the pricing on this page is for rearend and components as a package order ONLY and subject to change***