MIDWEST CHASSIS 82-02 F-BODY ANTI ROLL BAR
Midwest Chassis ARB Can be purchased with weld on chassis brackets or bolt on chassis brackets and will work with stock and aftermarket rear ends from 82-02 4th Gen F-Body's. Third gen chassis can only use the weld on brackets, the bolt-on are 4th gen specific It requires factory style sway bar brackets (welded in place) to bolt onto the rear end and if your rear end is not equipped with a factory style sway bar bracket that are welded in place we do sell the needed brackets separately. We do not recommend using a factory swaybar u-bolt clamp as it may twist under a load altering your settings. The installation of our bolt on ARB is very simple and no welding required. We use self lubricating bronze Oilite bushings. Don't be fooled by other anti roll bars that use poly mounting points that do not hold tension or sleeved tube that will not last very long.
NOTE- SOME REAR END MANUFACTURES USE DIFFERENT WIDTH SWAY BAR MOUNTING LOCATIONS. WE NEED TO KNOW THAT WIDTH AND REAR END BEFORE WE CAN SHIP OUT YOUR ORDER. THIS BETTER SERVES YOU TO GET THE PROPER ANTI-ROLL BAR. CUSTOM WIDTHS WILL ADD SOME SHIPPING DELAYS ESPECIALLY IF YOU CHOOSE ANOTHER OPTION BESIDES BLACK.
NOTE- YOU MUST USE THE SUPPLIES 3/8'S HARDWARE THAT COMES WITH OUR BOLT ON BRACKETS. THESE BOLT THROUGH THE FRAME AND REQUIRE DRILLING. FAILURE TO DO SO CAN RESULT IN BRACKET FAILURE.
WELD ON CHASSIS BRACKET- RS-A8202-ARB-WO
BOLT ON CHASSIS BRACKET- RS-A9202-ARB-BO