Midwest Chassis 1-1/4 standard wall ARB can be purchased with weld-on chassis brackets or bolt-on chassis brackets and will work with stock and aftermarket rear ends from 82-02 F-Body. Third gen chassis can only use the weld on brackets, the bolt-on are 4th gen specific It requires factory style sway bar brackets (welded in place) to bolt onto the rear end and if your rear end is not equipped with a factory style sway bar brackets that are welded in place we do sell the needed brackets separately. We do not recommend using a factory swaybar u-bolt clamp as it may twist under a load altering your settings. The installation of our bolt on ARB is very simple and no welding required. We use self lubricating bronze Oilite bushings. Don't be fooled by other anti roll bars that use poly mounting points that do not hold tension or sleeved tube that will not last very long.
NOTE- IF UPGRADING TO THE 1-1/2" ANTI-ROLL, YOU MUST USE WELD ON CHASSIS BRACKETS. THE BASE 1-1/4" HAS THE OPTION OF WELD ON OR BOLT ON CHASSIS BRACKETS.
NOTE- YOU MUST USE THE SUPPLIED 3/8'S HARDWARE THAT COMES WITH OUR BOLT ON BRACKETS. THESE BOLT THROUGH THE FRAME AND REQUIRE DRILLING. FAILURE TO DO SO CAN RESULT IN BRACKET FAILURE.
NOTE: RED IS GENERALLY A LIMITED INVENTORY ITEM, IF YOU ARE WANTING RED IT IS BEST TO CALL FIRST TO SEE IF IT IS IN STOCK. WE TRY TO KEEP MWC VERSION IN STOCK AND 31.5" BENT IN STOCK.
NOTE- THE 1-1/4 THICK WALL VERSION COMES WITH GUSSETED ARMS WHILE THE 1-1/2 DOUBE WALL COMES WITH GUSSETED ARMS AND THE ARMS HAVE STRAPS SURROUNDING THEM FOR MORE STRENGTH, EXTRA MOUNTING PLATE FOR THE HOUSING SWAY BAR BRACKETS, AND 3/8 HARDWARE.
Please note that free shipping is only for the lower 48 in the United States. Currently our website cannot process shipping/duties/taxes for international orders. We strongly suggest that international customers call orders in at +1 (309)382-6252.