These are replacement bushings for both ends of MWC panhard bars. Can be used with other manufacturers panhard as long as a 3/4" bore rod end is used.
Sizes:
- Stock rear w/ stock shoulder bolts = (2) 9/16" + (2) 1/2"
- If panhard bar was ordered with new panhard hardware = (4) 9/16"
- MWC 9" w/ stock shoulder bolt on chassis side = (1) 9/16" + (3) 1/2"
- MWC 9" w/ new chassis side bolt = (2) 9/16" + (2) 1/2"